1 1

Cottonwood

Binder Presser Foot for Juki Computerized Machines

Binder Presser Foot for Juki Computerized Machines

$32.99 USD
$32.99 USD
Sale Sold out
Inventory ID: 4946973006143

Low stock: 1 left

This presser foot is designed for attaching bias tape while neatly finishing the edge of fabric with a final binding width of approximately 0.2” (5mm).

  • It works by feeding bias tape—ranging from 0.75” to 1” (22 to 25mm) wide—through the guide. The foot then folds the tape in half twice (creating double-fold bias tape) and stitches it onto the fabric edge in one step.
  • You can also use single-fold bias tape measuring about 0.4” to 0.5” (10 to 13mm) wide. The guide can be adjusted left or right to fine-tune the needle position for perfect placement.
  • This foot will fit the Juki NX7, DX3000QVP, DX4000QVP, DX5, DX7, DX2000QVP, DX-1500, F600, F400, F300, G220, G120, HZL-HT710, HZL-HT740.
View full details

Cancellation Policy 

  • All classes require registration and prepayment. Please check our website for our full class offering.
  • Classes may be canceled for low registration or for events outside of our control (weather, etc.) - if this occurs, a full refund will be offered to any registered participants.
  • There are no refunds for class cancellations. Any cancellations made 72 hours prior to the start of the class will be offered a “class credit” valid for six (6) months. There is no guarantee that the same class will be offered, and class credits are not transferable to store credit.
  • Cancellations made less than 72 hours prior to the class start or no shows will forfeit their registration fees in their entirety.

COMPLETING REGISTRATION AND PAYMENT FOR A CLASS INDICATES YOUR ACCEPTANCE OF THESE CLASS POLICIES.
If you have any questions or require additional information, please contact us at hi@cottonwoodinthepark.com.